4Wheel & Off-Road Homepage 4-Wheel & Off-Road
Share This Share This Num Posts    Sort Order
1997 Chevrolet  
samtoycruiser
New User | Posts: 1 | Joined: 01/08
Posted: 02/13/08
01:16 AM

Hey there....

How can I remove the inside driver door panel of 1997 Chevrolet's venture minivan?

Please help.
Samantha  


 
keithpapa
User | Posts: 236 | Joined: 10/07
Posted: 02/13/08
10:14 AM

its all plastic so you have to be very careful, there should be some type of cover by the handle you pop off and there should be a cap screw behind it that is holding tight to the door once you get that done then you have to gently pry away the bottom of panal(kinda tuff because of little plastic retainers that hold the panel on,they will break! be carefull here too)you can grap a lower corner w/your finger tips or gently use a flat blade to do this.
once removed then disconnect the door switches and change whats needed then when replacing panel make sure no retainers are broken and line them up w/the holes in the door and give the panel a firm swat to get the retainers back in the holes
if any retainers are broken you might be able to get them at a parts house or the dealer for sure!  


 
  • RSS Feed
    • Add to My Yahoo!
    • Add to Google
    • Subscribe on Bloglines
    • Subscribe on NewsGator
    • MyMSN
    • My AOL
    • Add to NetVibes
    • Add to Rojo
    • Add to NEWSBURST
    • Add to Technorati
    SUBSCRIBE TO OUR FORUMS