i have a 98 jeep tj and the left signal works fine but the right blinks real fast. now before you laugh at me here this i checked and changed all fuses, then checked and changed all bulbs then on top of that i have even changed the pigtails leading to the bulbs because of what looked like a little corrosion. the lights on the side and back work but the front only comes on as the marker but won't even blink fast. any help would be apprieciated. thanks mike  

I have no idea, is it the actual signal or the on the insturment panel?  

it flashes fast on the instrument panel and on the front marker light and rear signal light but the front signal does nothing.  

You have a broke wire that you will have to trace  

even if the front signal comes on with the headlights but still does not blink? it only comes on as the marker. basically what i'm saying is there is still power to there it just wont signal, could this still be a broken wire?  

o.k. now if thats not bad enough i tried tracing the wires they seem to be in good shape so in an attempt to please johnny law...(the cops who so kindly informed me in the first place) i tried to jimmy rig a set of jumper wires from the side light(that works) to the  corisponding color coded wires on the front light that comes on but won't blink, and it still won't blink. know this made me think i by passed bad wiring (if there was any)by directly wiring it so it must be the bulb right? no even with a new bulb it wouldn't blink. i'm out of ideas any thoughts?