4Wheel & Off-Road Homepage 4-Wheel & Off-Road
Share This Share This Num Posts    Sort Order
I want to lift + new tires on my S10, need advice...  
blueyes13
New User | Posts: 1 | Joined: 08/08
Posted: 08/11/08
12:39 PM

I''m looking to get a lift on my 2003 S10 pickup. Everything is standard, just to make that clear.

So I am thinking i want a 5" lift for the truck... and i don''t want the lift/suspension kit to be cheap, so suggestions would be appreciated. I am trying to make the truck more off road-friendly. I am also considering having the front end lifted an inch extra for more clearance in the front... This is possible i hope.

I am also looking to get new tires along with the lift.  Not gonna be rock crawling or anything too extreme, but i''m thinking 29"-30" is what i''m gonna be aiming for for the size, tread type is still undecided...


Any suggestions? I''m not too mechanically savvy so i need some help, how much am i looking at price wise and what are some kits you guys would suggest.

Thanks!  


 
mudb8_
Moderator | Posts: 315 | Joined: 11/07
Posted: 08/11/08
03:07 PM

a 5" lift would look pretty goofy with 30" tires,....

go solid..

 


Help save TELLICO...VIRTUAL RALLY for Tellico...

http://www.pirate4x4.com/forum/showthread.php?p=8149649#post8149649

The rally will be on Wednesday May 7th from 4 to 9 pm Eastern Standard Time.
Be there and post up POSITIVE COMMENTS!!

 
96chevypowell
New User | Posts: 34 | Joined: 08/08
Posted: 08/11/08
03:45 PM

bds makes a solid 5" kit for your s-10. along with a set of 33 or 35 inch tires your truck would look killer  


 
plow_boy.
New User | Posts: 3 | Joined: 08/08
Posted: 08/13/08
08:38 AM

You should be able to fit 31s with no lift or with a little help.  


 
troyholland08
New User | Posts: 16 | Joined: 08/08
Posted: 08/21/08
08:49 PM

if u do a 5" go with 35's and raise the front an inch too. itll look good  


 
k5blazer2
New User | Posts: 29 | Joined: 11/07
Posted: 09/07/08
08:16 PM

you can fit 31's stock or i did on my 95 s10 when i had it, it would only rub under sharp turns and a little flexing, so 5 inches of lift with 31's to 32's would be good in my opinion for mpg's, decent gearing with out changing out the ring and pinions but might be helpul by the way but not necassry(spelling), and not to tear up way to much of the ifs suspension and cv axles, if you want bigger tires def consider a solid axle swap  


 
the427chevy
User | Posts: 52 | Joined: 01/08
Posted: 09/07/08
08:25 PM

go with a moderate lift, between 3 and 5 inches, keep the tire size 35 and below, leave out the solid axle. no point in adding the extra weight, not to mention the endless removing of IFS suspension compents, new drive shafts and the finding of an axle, if you stay under 35's with your tires you might be able to keep from blowin out the rear end. or you can regear to correct for your tire size
since you were thinking only 29 or 30 inch tires if thats the way you want to go, a whole 5 inches of lift isn't that neccessary  


 
  • RSS Feed
    • Add to My Yahoo!
    • Add to Google
    • Subscribe on Bloglines
    • Subscribe on NewsGator
    • MyMSN
    • My AOL
    • Add to NetVibes
    • Add to Rojo
    • Add to NEWSBURST
    • Add to Technorati
    SUBSCRIBE TO OUR FORUMS