what's needed to build a mud/daily driver

mnyman92:
hey Finder, how do I become a user on here? I am a new user right now.

It just takes time.I think how many posts you have has some thing to do with it.Mine just changed a week ago from new user.  
Dying ain't much of a livin'
From my favorite movie.
Trucks...
1989 150(200k) 33 inch hawgs and a blown 302.
1995 Pathfinder(178k)and still going with 31s.
Bikes.
2004 Yamaha TTR 225,barly used.
Kawasaki 750 (26k) Not ran right since carbs rebuilt.
!972 Yamaha mini enduro.The niceest one I've ever seen thats never been painted.
New 2002 f150,fx4,5.4v8,after market tranny coolers and unirol tires.

I have to say, the SSR's I have on my truck don't do good on ice but I know they are alot better when you have them siped. A friend of mine did that to his and he goes on the ice where I just spin. It doesn't matter what the tire pressure is either.  

Siped does help a lot.It is also known to improve tire life.Oils in the tire keeping the rubber from drying out(or something like that)  
Dying ain't much of a livin'
From my favorite movie.
Trucks...
1989 150(200k) 33 inch hawgs and a blown 302.
1995 Pathfinder(178k)and still going with 31s.
Bikes.
2004 Yamaha TTR 225,barly used.
Kawasaki 750 (26k) Not ran right since carbs rebuilt.
!972 Yamaha mini enduro.The niceest one I've ever seen thats never been painted.
New 2002 f150,fx4,5.4v8,after market tranny coolers and unirol tires.

Maybe a 351 or a 460 is in the future when my current engine dies.mayb I will get anouther Ford when mine kicks the can. I think I will go with the BFG KM2 in 35-37" size. It seems like the perfect all-around tire on the market right now.Really all I need for my truck is a e4od tranny w/ a tcase for my plans to come together. I plan on getting a broncograveyard.com straight axle kit, a dana 44 front end and 4.88-5.29 gearsand a 6" rear lift springs. If you find a fault in this plan please tell me.  
_______________
.
.
Dodge sucks!!!!!!

what does sipped mean?  
_______________
.
.
Dodge sucks!!!!!!

No I dont see a fault in it.It sounds that you have your plan pretty well done up.But if you do up grade the motor to a 351 or 460 or even go to 40s you might want to think about a Dana60.Maybe a body lift.A 4.88 is good but with the od tranny maybe a 5.13.Sounds like its going to be a kick-ass DD truck.  
Dying ain't much of a livin'
From my favorite movie.
Trucks...
1989 150(200k) 33 inch hawgs and a blown 302.
1995 Pathfinder(178k)and still going with 31s.
Bikes.
2004 Yamaha TTR 225,barly used.
Kawasaki 750 (26k) Not ran right since carbs rebuilt.
!972 Yamaha mini enduro.The niceest one I've ever seen thats never been painted.
New 2002 f150,fx4,5.4v8,after market tranny coolers and unirol tires.

mnyman92:
what does sipped mean?

It means that you modify you treads by cutting grooves in them to allow for better traction.  
Dying ain't much of a livin'
From my favorite movie.
Trucks...
1989 150(200k) 33 inch hawgs and a blown 302.
1995 Pathfinder(178k)and still going with 31s.
Bikes.
2004 Yamaha TTR 225,barly used.
Kawasaki 750 (26k) Not ran right since carbs rebuilt.
!972 Yamaha mini enduro.The niceest one I've ever seen thats never been painted.
New 2002 f150,fx4,5.4v8,after market tranny coolers and unirol tires.

I do want to say one thing, I WANT AN EARLY BRONCO. I would do a lot of things to get one. If it was runable I would trade my truck in for one because they are the BEST vehicle EVER.  
_______________
.
.
Dodge sucks!!!!!!

Sipe, Siped, or Siping: Small cuts across tread surface of tire to create a "biting" edge for the tire to grip a surface better.  

I could find you a 80s bronc witha dana 60 front 351 and 9 in the back and a winch on 35 already.A early one might take a bit thought.  
Dying ain't much of a livin'
From my favorite movie.
Trucks...
1989 150(200k) 33 inch hawgs and a blown 302.
1995 Pathfinder(178k)and still going with 31s.
Bikes.
2004 Yamaha TTR 225,barly used.
Kawasaki 750 (26k) Not ran right since carbs rebuilt.
!972 Yamaha mini enduro.The niceest one I've ever seen thats never been painted.
New 2002 f150,fx4,5.4v8,after market tranny coolers and unirol tires.

I'm not going to trade in my truck for a long time, I have toooo many ideas for it.  
_______________
.
.
Dodge sucks!!!!!!

You ever see one of those mini pick up/half cab broncs.I had one sitting at a used car dealer ship in my town for about a year.I think they finally just junked it.It had a lot of bondo but it had a 289 Hi-Po 'stang motor in it and a 3 speed on the floor.It was a neat little truck.  
Dying ain't much of a livin'
From my favorite movie.
Trucks...
1989 150(200k) 33 inch hawgs and a blown 302.
1995 Pathfinder(178k)and still going with 31s.
Bikes.
2004 Yamaha TTR 225,barly used.
Kawasaki 750 (26k) Not ran right since carbs rebuilt.
!972 Yamaha mini enduro.The niceest one I've ever seen thats never been painted.
New 2002 f150,fx4,5.4v8,after market tranny coolers and unirol tires.

No. I never saw one.  
_______________
.
.
Dodge sucks!!!!!!

How much do you think a 460 would go for?  
_______________
.
.
Dodge sucks!!!!!!

mnyman92:
How much do you think a 460 would go for?

If you gotta ask you cant afford it
For a running moter probly about 1500. A core for 300-500.And a "Built" one 2000-10,000.Thats for a drag pro built moter.  
Dying ain't much of a livin'
From my favorite movie.
Trucks...
1989 150(200k) 33 inch hawgs and a blown 302.
1995 Pathfinder(178k)and still going with 31s.
Bikes.
2004 Yamaha TTR 225,barly used.
Kawasaki 750 (26k) Not ran right since carbs rebuilt.
!972 Yamaha mini enduro.The niceest one I've ever seen thats never been painted.
New 2002 f150,fx4,5.4v8,after market tranny coolers and unirol tires.