|
|
Item Posts
Sort Order
|
|
|
1993 s-10 v8 swap
|
|
Posted: 03/12/09
04:28 PM
|
|
i have a 1993 s-10 2wd woth a 2.8 L and a 5 spd i want to take a motor from a 76 blazer and a turbo 350 automatic tranny and put it in the s-10 my questions are... what would have to be done to the fuel delivery system ? because im going from a TBI to a carbed and will removing all the plugs, etc... to the engine interfere with lights etc...when i remove the tbi and replace it with a carbed motor....i want to kepp the truck road worthy
|
|
|
|
k.salerno
New User
| Posts: 2
| Joined: 03/09
Posted: 03/12/09
06:01 PM
|
|
i have a 1991 chevy 1500 i did this with and you can use all gauges as long as you tranfer the sensors. i used the factory fuel pump with a bypass regulator which edelbrock makes and if u need i can get you the part number. it was around 50 bucks. the only thing if you choose not to use the factory oil psi gauge you have to hardwire the pump to key voltage and it is a pink and black wire that can be found on the pass side firewall. other than that the sweap was very easy and i drive the truck everyday with out problems. took out the ecu and had no problem with gauges working.
1991 chevy truck
-358 Ci SBC
-6 inch suspension lift
-3 inch body lift
-38" tires
-turbo400
-NP205
-dana 60 front
-corprate 14 bolt rear
-BUILT NOT BOUGHT!!!
|
|
|
|
|
|
|
|
|