|
|
Item Posts
Sort Order
|
|
|
dodge 360 misfire?
|
Red_Ram
New User
| Posts: 3
| Joined: 03/09
Posted: 03/09/09
04:59 PM
|
|
I have a misfire on cylindre #1 on an obd scan reader. I can't find the problem. I changed plug wires, rotor, plugs and still no fix. The problem occurs if I run it wide open for a bit then idle gets ruff and the problem goes away after I baby it for a week. Some people tell me its mechanical others electrical. Any help would be apreciated spring runs are coming and I will need all the ponies.
|
|
|
|
1978k-20
User
| Posts: 142
| Joined: 05/08
Posted: 03/10/09
02:05 PM
|
|
check your coil. sounds like it might be starting to get weak.
|
|
|
|
Red_Ram
New User
| Posts: 3
| Joined: 03/09
Posted: 03/10/09
08:04 PM
|
|
will do thanks
|
|
|
|
|
|
1978k-20
User
| Posts: 142
| Joined: 05/08
Posted: 03/11/09
03:05 PM
|
|
i would also check the fuel injectors.
|
|
|
|
|
Posted: 03/28/09
09:50 PM
|
|
Check compression on that cylinder compare to another. May have a bent valve, bent valve guide or just build up on a valve and it is not allowing it to close all the way.
|
|
|
|
|
Posted: 04/06/09
04:05 PM
|
|
ill agree buddies truck does the same thing and its a bent valve
|
|
|
|
|
Posted: 04/06/09
07:22 PM
|
|
Could also be a loose rocker, or worn spring. Is there a slight knock at all. Take the valve cover off and run it watch the rockers and make sure they are working ok.
Fixed
Or
Repaired
Daily
But you gotta love em.
1988 Dodge Power Ram 250 5.2L 318CID EFI, Granny Geared 4spd manual,8 bolt Dana 60 Back and 8 bolt Dana 40 front, 4x4, Custom Rear and front bumper, CB, Has electric trailer brake module, Motor Replaced with napa Rmfd engine last year, new cluth along with new u-joint on entire truck.
(SOLD)1992 Ford Bronco XLT 5.0L 302 CID swaped for 5.8L 351W CID, auto trans, Electric transfer case w/ manual lock hubs, dual cherry bomb exhaust,
|
|
|
|
|
|
|