|
|
Item Posts
Sort Order
|
|
|
Jackin' my durango
|
|
Posted: 08/09/09
10:26 AM
|
|
Hi everybody,
I just bought my 2001 Dodge Durango 4.7 4wd and now i want to customize it to go off-road it's my first experience with jacking a truck so i would need advice on my futur project on it.
could you tell me if the setup i thought is compatible and will be compatible in the futur.
So here it is... 
i want to start with a 3inch body lift with front and rear rancho rs9000 shock. does the shock have to be taller!? cause im planning a 3inch suspension rancho or a 5.5 tuff country also i want to order 33x12.50 or 35x12.50 on it next summer does a 3inch body lift will be enough!? and finally i want to change my ball joint and tie rod do i have to order special thing or is there a set coming with the suspension kit!?
Thx for the info
Franck
|
|
|
|
|
Posted: 08/10/09
03:43 PM
|
|
one of the first things you can do since the Durango has a spring under suspension on the back is you can convert it to spring over that will give you a bit of lift. after that with just the body lift you can fit 33's under it. I would actually recommend going with just the 5.5 inch tuff country lift, cause I have been told not to mix a body lift and a suspension lift.
|
|
|
|
|
Posted: 08/11/09
02:12 PM
|
|
Well i'm not sure about it...i think i've seen a lot of durango's having both lift but im not really sure...if some people could post more comment.......
I think i'll go for a 3inch rancho but i read on a site that the 4.7's model and the Factory wheel (15¨) have to be replace if there's someone that could answer me about that it would be great!
Thx
Franck
|
|
|
|
|
|
|
Posted: 08/12/09
07:42 PM
|
|
go to the rancho suspension website it will give you more info about the lift you are looking at
|
|
|
|
|
Posted: 08/13/09
08:23 PM
|
|
what's the difference between the rs6561 and the Rs6561B!?
|
|
|
|
|
|
|