Bronco 302 slow????? please help

hi i have an 87 ford bronco with a fuel injected 302 it takes about 21 seconds to get to 35mph and i know thats not the right power any ideas of what is wrong i think its the fuel injector, i have replaced the fuel pump,radiator,replaced all fluids with high performance fourmula,changed air filter,full tune up  
Get a Real Truck Get A FORD

Did you try a new set of plugs and wires?  

yea i guess i should mention i did a full tune up thanks  
Get a Real Truck Get A FORD

catalatic converter or you have a vacum hose that is not connected causing it to not shift right, that is if you have a auto transmission.. you may also want to check out some bronco only websites..  

THANKS STOCK1970 ILL TRY IT  
Get a Real Truck Get A FORD

Check your throttle cable. Could be stretched, frayed, caught up on something. Or maybe you have a compression problem in a cylinder, not to sure on that one tho.
also check the kick down cable...if you have one. Thats what tells the truck to shift into a lower gear to give you more rpm (power).

My 1989 Dodge Ram Charger had a stretched throttle cable and a broken kick down cable. So I moved at about the speed of a snail. lol it litterally took me a full minute to reach 60mhp.

Hope this helps,
Josh  
Fixed
Or
Repaired
Daily
  But you gotta love em.

1988 Dodge Power Ram 250 5.2L 318CID EFI, Granny Geared 4spd manual,8 bolt Dana 60 Back and 8 bolt Dana 40 front, 4x4, Custom Rear and front bumper, CB, Has electric trailer brake module, Motor Replaced with napa Rmfd engine last year, new cluth along with new u-joint on entire truck.

(SOLD)1992 Ford Bronco XLT 5.0L 302 CID swaped for 5.8L 351W CID, auto trans, Electric transfer case w/ manual lock hubs, dual cherry bomb exhaust,

thanks daddy bronco ill try it  
Get a Real Truck Get A FORD

get the pcm for the 5.8L