|
|
Item Posts
Sort Order
|
|
|
sway bar removal? help
|
|
Posted: 10/25/09
10:06 AM
|
|
when removing my sway bars, do i need to use a jack to lift the vehicle (to releave pressure from the sway bars) or will that have the opposite effect. In that case do i just use a wrench and torx to remove the bottom bolt with my jeep sitting on flat ground????
99jeepTJ Sport
|
|
|
|
|
Posted: 10/25/09
03:46 PM
|
|
i have a 99 cherokee and i removed my sway bar while the jeep was on the ground. i took off the bushings and brackets that the bushings were in and then took of the nut that held the sway bar onto the end links. this required a hammer or a well placed kick. i dont know it its the same in your case but i hope this helps. good luck.
99 cherokee sport with a costume front bumper. 7 inch optronic lights 30 x 9.5 goodyear wrangler GS/A tires and TJ flares modified to fit my Jeep 
|
|
|
|
|
Posted: 10/27/09
12:18 PM
|
|
Sitting on level ground is fine. Being level is the key.
-------------------------------------------------------------
Long Travel 4WD - The best of Both Worlds
Questions? Comments? Concerns? PM Me!
|
|
|
|
|
|
|
Posted: 10/28/09
12:54 PM
|
|
ya, that kindof important too! LOL
99 cherokee sport with a costume front bumper. 7 inch optronic lights 30 x 9.5 goodyear wrangler GS/A tires and TJ flares modified to fit my Jeep
|
|
|
|
|
|
|